Abstract & Overview
The effect of nanosized carbon filler on the physical and mechanical, and relaxation properties of a polymer composites based on polychlortrifluoroethylene was investigated by an ultrasonic method. Nanoscale filler was obtained by ultrasonic dispersion of thermally expanded graphite. The dispersion of thermally expanded graphite, taking into account the peculiarities of the crystal lattice, leads to the formation of a specific bridging system, when the dimensions of the bridges along it are about 1 5 μm and across 2 5 μm. This is due to the peculiarity of the influence of this type of filler on the polymer matrix and the corresponding change in the physical and mechanical properties. The method of preliminary determination of the percolation threshold is developed and described. The inversion of the mechanical properties of composites during the transition through the percolation threshold was investigated.As a result of ultrasound studies of the physical and mechanical properties of composites of the PCTFE - nanodispersed graphite system, it was found that during the through "sounding" in the mode of impulse tests, the condition of unlimited medium for determining the speed and absorption of ultrasound is , where d is the diameter of the sample, λ is the length of the ultrasonic wave. This gives grounds for calculating the longitudinal oscillation modulus for PCTFE and PCM based on it to neglect the correction for non-elastic resistance and to use the relation E = ρC2, which greatly simplifies the calculations of the physical and mechanical, and relaxation characteristics complex.The results of the studies show that the polychlorotrifluoroethylene - nanodispersed graphite system is characterized by a relatively low percolation threshold (0.95 wt. %). Depending on the nanocarbon concentration, the structure of the polymer matrix and the system as a whole is characterized by changes in the size of the inhomogeneities, which is related to the transition from inhomogeneities in the form of crystallites, the growth of which is caused by the influence of the nanofiller at low concentrations, through the percolation threshold, to the inhomogeneities related to the coagulation of nanoparticles at concentrations in excess of the percolation threshold. In addition, ultrasonic studies of the physical and mechanical, and relaxation properties of the composites of the PCTFE - nanodispersed graphite system showed that it is impractical to use concentrations much higher than the percolation threshold when creating nanocomposites, since this leads to the coagulation of the filler particles and the disintegration of the matrix, which negatively affects their complex of physical and mechanical, and performance properties.