We use a few cookies

Essential cookies keep the library working. With your permission, we'd also like to use analytics to see what's useful and improve the experience. Read our Privacy Policy or Cookie Policy.

Skip to main content
Home/e-Resources/Electronics & Telecommunication Engineering/Experimental Studies on Thermal Performance of a Pulsating Heat Pipe with Methanol/DI Water
PeriodicalsElectronics & Telecommunication Engineering

Experimental Studies on Thermal Performance of a Pulsating Heat Pipe with Methanol/DI Water

Checking your access to this record.

Abstract & Overview

The effect of working fluid on the start-up and thermal performance in terms of thermal resistance and heat transfer coefficient of a pulsating heat pipe have been studied in the present paper. Methanol and de-ionized water has been selected as the working fluid. The minimum startup power for DI water was obtained at 50% filling ratio and for methanol at 40%. The optimum filling ratio in terms of minimum startup power and minimum thermal resistance was 50% for DI water and 40% for methanol. The minimum thermal resistances for DI water and methanol were observed at vertical orientation. The evaporator side heat transfer coefficient for water was slightly more, while the condenser side heat transfer coefficient was appreciably more than that of methanol. Studies were also conducted for start-up time and temperature at different orientations and it was found that the PHP charged with methanol worked efficiently at all orientations.

Cite this record

Bhawna Verma, V. L. Yadav, Kaushal Kumar Srivastava (2013). Experimental Studies on Thermal Performance of a Pulsating Heat Pipe with Methanol/DI Water. Journal of Electronics Cooling and Thermal Control, 03(01), 27–34. https://doi.org/10.4236/jectc.2013.31004

Copy in another style

Verma, B., Yadav, V. L., & Srivastava, K. K. (2013). Experimental Studies on Thermal Performance of a Pulsating Heat Pipe with Methanol/DI Water. Journal of Electronics Cooling and Thermal Control, 03(01), 27–34. https://doi.org/10.4236/jectc.2013.31004
Author names are used as deposited, so check their order before you submit.

Metadata is harvested from open-access indexes and can be incomplete. Check a citation against the published version before relying on it — see our open access & attribution policy.