We use a few cookies

Essential cookies keep the library working. With your permission, we'd also like to use analytics to see what's useful and improve the experience. Read our Privacy Policy or Cookie Policy.

Skip to main content
Home/e-Resources/Dentistry/Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM
PeriodicalsDentistry

Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM

Checking your access to this record.

Abstract & Overview

The computer-aided design/computer-aided manufacturing (CAD/CAM) system was introduced to shorten the production time of all-ceramic restorations and the number of patient visits.Among these types of ceramic for dental CAD/CAM, they have been processed into inlay, onlay, and crown shapes using leucite-reinforced glass-ceramics to improve strength.The purpose of this study was to observe the mechanical properties and microstructure of leucite-reinforced glass-ceramics for dental CAD/CAM.Two types of leucite-reinforced glass-ceramic blocks (IPS Empress CAD, Rosetta BM) were prepared with diameter of 13 mm and thickness of 1 mm.Biaxial flexural testing was conducted using a piston-on-three-ball method at a crosshead speed of 0.5 mm/min.Weibull statistics were used for the analysis of biaxial flexural strength.Fracture toughness was obtained using an indentation fracture method.Specimens were observed by field emission scanning electron microscopy to examine the microstructure of the leucite crystalline phase after acid etching with 0.5% hydrofluoric acid aqueous solution for 1 minute.The results of strength testing showed that IPS Empress CAD had a mean value of 158.1±8.6 MPa and Rosetta BM of 172.3±8.3MPa.The fracture toughness results showed that IPS Empress CAD had a mean value of 1.28±0.19MPa•m 1/2 and Rosetta BM of 1.38±0.12MPa•m 1/2 .The Rosetta BM sample exhibited higher strength and fracture toughness.Moreover, the crystalline phase size and ratio were increased in the Rosetta BM sample.The above results are expected to elucidate the basic mechanical properties and crystal structure characteristics of IPS Empress CAD and Rosetta BM.Additionally, they will help develop leucite-reinforced glass-ceramic materials for CAD/CAM.

Cite this record

Seon-Mi Byeon, Jae-Joo Song (2018). Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM. Journal of dental hygiene science, 18(1), 42–49. https://doi.org/10.17135/jdhs.2018.18.1.42

Copy in another style

Byeon, S., & Song, J. (2018). Mechanical Properties and Microstructure of the Leucite-Reinforced Glass-Ceramics for Dental CAD/CAM. Journal of dental hygiene science, 18(1), 42–49. https://doi.org/10.17135/jdhs.2018.18.1.42
Author names are used as deposited, so check their order before you submit.

Metadata is harvested from open-access indexes and can be incomplete. Check a citation against the published version before relying on it — see our open access & attribution policy.