We use a few cookies

Essential cookies keep the library working. With your permission, we'd also like to use analytics to see what's useful and improve the experience. Read our Privacy Policy or Cookie Policy.

Skip to main content
Home/e-Resources/Nanotechnology/Characterization of asphalt binders blended with nanomaterial and polymer
Conference ProceedingsNanotechnology

Characterization of asphalt binders blended with nanomaterial and polymer

Checking your access to this record.

Abstract & Overview

Abstract Modification of bitumen binders with polymers and nanomaterials has successes in mitigating various major causes of pavement failures. The aluminum oxide nanoparticles (AI2O3) and Acrylate-Styrene-Acrylonhrtilrei polymer (ASA) were poured on the base bitumen binder 60/70 penetration grade with percentages of 3, 5 and 7% by the weight of bitumen binder. The outcome shows that the inclusion of polymer modified binders (ASMBs) and nanoparticles modified binders (ALMBs) matter has a great deal of impact on the rheological behavior of the bitumen binder at intense temperatures. However, the complex shear modulus (G*) improves the mix of the two modifiers. The increment at 75 °C was 63.70% for five percent ASBMs polymer, while for ALMBs, 71.12% for five percent. Although, the modified bitumen binders show high resistivity to rutting in intense temperatures, upon increment to 80% and 59% for five percent concentration of ASMBs as well as ALMBs chronologically. The refinement of bitumen binders gives an increase in the property of the binder which is the creep recovery for approximately about 69.23% and 62.53%. The use of ASMBs and ALMBs as discovered in this study shows that both modifiers above can mitigate the issues of the bitumen binder at intense temperatures, and five percent is regarded as the maximum constituent of the two modifiers.

Cite this record

Shaban Ismael Albrka Ali‬, Abdullah Abubaker, Abduraouf. B. Z. Alshetwi (2020). Characterization of asphalt binders blended with nanomaterial and polymer. IOP Conference Series Materials Science and Engineering. https://doi.org/10.1088/1757-899x/800/1/012002

Copy in another style

Ali‬, S. I. A., Abubaker, A., & Alshetwi, A. B. Z. (2020). Characterization of asphalt binders blended with nanomaterial and polymer. IOP Conference Series Materials Science and Engineering. https://doi.org/10.1088/1757-899x/800/1/012002
Author names are used as deposited, so check their order before you submit.

Metadata is harvested from open-access indexes and can be incomplete. Check a citation against the published version before relying on it — see our open access & attribution policy.