Abstract & Overview
Background. The article examines the influence of the parameters of the drive wheel (coefficient of longitudinal stiffness and tire damping) of the technological module on energy transfer (indirectly, loads on its components (assemblies and mechanisms)) caused by the torque on the axis of the drive wheel and traction from the tractor. The evaluation was performed by determining the spectral densities and amplitude-frequency characteristics of the angular and translational speeds of the drive wheel through the realization of its torque and horizontal forces from the tractor attachment and working tool, recorded during the technological operation performed by the tractor unit. The study used a mathematical model of the drive wheel of the technological module, which is an additional third drive axle of a tractor with a 4K4 wheel formula. The dependence of the RMS deviation of the oscillations of the output parameter of the technological module, the angular velocity of the drive wheel, depending on the coefficient of longitudinal stiffness and the amount of tire damping, is estimated. Purpose. The search for optimal parameters of the drive wheel (coefficient of longitudinal stiffness and tire damping) of the technological module to reduce fluctuations in the angular velocity of the drive wheel due to the torque on its axis and traction from the tractor. Methodology. The methods of statistical dynamics and the theory of wheel motion were used in the article. Results. The spectral densities and amplitude-frequency characteristics of the angular and translational speeds of the drive wheel are obtained through the realization of its torque and horizontal forces from the tractor attachment and working tool, recorded during the technological operation performed by the tractor unit. Practical implications. The results obtained can be used in the development and production of tractors and automobiles.