We use a few cookies

Essential cookies keep the library working. With your permission, we'd also like to use analytics to see what's useful and improve the experience. Read our Privacy Policy or Cookie Policy.

Skip to main content
Home/e-Resources/Materials Science/Preparation of graphene oxide composited zinc oxide films by electrostatic spray deposition for humidity sensors
PeriodicalsMaterials Science

Preparation of graphene oxide composited zinc oxide films by electrostatic spray deposition for humidity sensors

Checking your access to this record.

Abstract & Overview

This work aimed to study the preparation of graphene oxide (GO) and zinc oxide (ZnO) composited films by electrostatic spray deposition for use in fabricated humidity sensors. The physical properties of prepared films were examined with X-ray diffraction, Raman spectroscopy, and scanning electron microscope. Subsequently, a humidity sensor was fabricated using a low-cost interdigitated electrode pattern with the print circuit board. The humidity sensing behaviors were assessed with fixed humidity levels in a saturated aqueous salt solution in the humidity range of 11 – 93%RH. The impedance value of the device was obtained with a precision LCR meter. It was found that the composited film of 0.50 %wt. GO demonstrated the highest humidity response with optimized humidity sensitivity, hysteresis error, and response/recovery times of 2.68 ´ 103, 4.89%, and 228/19 s, respectively. Moreover, the equivalent circuits for the prepared device at various humidity levels were acquired with impedance spectroscopy to propose the mechanism for the humidity sensing of the device.

Cite this record

Thutiyaporn Thiwawong, Thitiwat Maboonchauy, Korakot Onlaor, Benchapol Tunhoo (2023). Preparation of graphene oxide composited zinc oxide films by electrostatic spray deposition for humidity sensors. Journal of Materials Science and Applied Energy, 12(3), 252232–252232. https://doi.org/10.55674/jmsae.v12i3.252232

Copy in another style

Thiwawong, T., Maboonchauy, T., Onlaor, K., & Tunhoo, B. (2023). Preparation of graphene oxide composited zinc oxide films by electrostatic spray deposition for humidity sensors. Journal of Materials Science and Applied Energy, 12(3), 252232–252232. https://doi.org/10.55674/jmsae.v12i3.252232
Author names are used as deposited, so check their order before you submit.

Metadata is harvested from open-access indexes and can be incomplete. Check a citation against the published version before relying on it — see our open access & attribution policy.